As a competitor, you need an accurate and precise landing pad to record your landing score.

Our design uses a series of concentric circles on the base structure for each score 00, 01, 02, etc.

When you land on the pad, the top conductive surface connects immediately with the score circuit ring you land on, producing an electrical connection that allows the score display to show the immediate landing score.

This is a simple but very effective solution.

Our system needs no calibration, you land on the pad, and your score is accurate.

Our 00-16cm score landing pads are manufactured with a 1000 dernier acrylic Cordura fabric base and Dupont ballistic nylon on the top surface. The top surface is the same as used in military ballistic protective equipment; it will not break, is resistant to stretch, and is extremely durable.

We use braided and shielded cables manufactured to military defence standard specifications.

Our score landing pads have a 2cm Dead Centre, and a 1cm Dead Centre is available upon request.
A 00-20cm score landing pad is available upon request.

The landing pads have 15m connecting cables and a 4-point elasticated shock cord tie-down system.

The conductive material used in our landing pad products was originally designed for use by N.A.S.A.; these fabrics have a surface resistance of ≤ 0.05 Ohms.

We manufacture replacement Weckbecker pads, which are available on request.

The 1.2m "Control" pad is manufactured with the same electronic conductive fabrics. It is susceptible to the first point of contact and can be relied on to demonstrate a "rear" foot strike.

If required, the control pad can be marked with a 30cm or 50cm diameter circle.

You can choose the 1.2m pad colour, Blue, as a contrasting colour works well; it does not have to be Black.